Cisco Unified Communications Manager 6.0 PBX Configuration Note
Posted by Mino on October 9, 2008
cisco-unified-communications-manager-60
This topic provides link to configuration notes for Cisco Unified Communications Manager 6.0 that have been created and tested by Microsoft . When Microsoft or a partner deploys Exchange 2007 Unified Messaging with a new IP gateway and PBX or IP PBX configuration, the prerequisites and configuration settings are documented. This information is used to create a configuration note.
PBX configuration note contains information about how to deploy Exchange 2007 Unified Messaging with a specific telephony configuration including the manufacturer, model, and firmware version for the IP gateways, IP PBXs or PBXs. In addition, each PBX configuration note also includes other information such as:
- Contributors in authoring the configuration note.
- Detailed prerequisites, including the following:
- Features that have to be enabled or disabled on the PBX.
- Specialized hardware that has to be installed.
- Is an IP gateway required?
- Features that must be present on the IP gateway if one is needed.
- Specific cabling requirements between an IP gateway and a PBX.
- A list of Unified Messaging features that may not be available with a given telephony configuration
Andrew Bower said
Hi there,
FYI – Tried to download your “Cisco Unified Communications Manager 6.0 PBX Configuration note” however I get a 852 byte pdf file which is corrupt.
Cheers
Andrew
Mino said
please check now , i have uploaded the file again